進口力士樂(lè )模擬放大器,REXROTH模擬放大器連接方式[產品打印頁面]

進口力士樂(lè )模擬放大器,REXROTH模擬放大器連接方式
The amplifier card may only be unplugged and plugged when de-energized.
必須遵守技術數據中規定的電纜長度和橫截面積。
For signal lines and solenoid conductors, we recommend using shielded cables.
The cable shield must be connected to the control cabinet extensively and as short as possible.
The valve solenoid must not be connected to free-wheeling diodes or other protection circuits.
不要將電磁線圈和信號線鋪設在電源線附近。
對于信號線和電磁導體，我們推薦使用屏蔽電纜。
Outputs short-circuit-proof, fast energization for short actuating time
Anschlussart
32-pin male connector, DIN 41612, form F
Ambient temperature range
Differential input for voltage
Adjustable ramp time, sensitivity and zero point
Controlled output stage
LED displays for various operating states
電纜屏蔽層必須盡可能短地連接到控制柜。
閥電磁鐵不能連接到續流二極管或其他保護電路。
The cable lengths and cross-sections specified in the technical data must be complied with.
Reference voltage
Potentiometer supply
The distance to aerial lines, radios, and radar systems has to be at least 1 m.
Do not lay solenoid and signal lines near power cables.
放大器卡只能在斷電時拔下插頭。
與架空線，無線電和雷達系統的距離必須至少為1米。

進口力士樂(lè )模擬放大器,REXROTH模擬放大器連接方式

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!